Here at Wroot Water we use The Grundfos SP range of submersible pumps for their high efficiency and reliability. They are made of corrosion resistant stainless steel and can be used for a variety of applications.

We specialise in water pumping systems for clean and dirty water. We offer electric submersible and electric free standing pumps working with pressures from 1 bar up to 16 bar. We are also able to offer high and low volumes from 1m3 per hour up to 1000m3 per hour. For higher volumes we use multiple pumps with inverter drives. We also supply and install all of the above types of systems when and where necessary. We are also able to supply diesel engine pumps.

Over the last 10 years we have seen a increasing demand from customers to refurbish old pumping systems as well as converting electrical pumping controls to a Variable Speed Drive. This saves energy and subsequently money too.

Rotorflush Filter Pumps (Submersible):

These filter pumps are nauti submersible with an integral self-cleaning intake filter that has a maximum output of 220 litres/minute and a maximum pressure of 10 bar. They are fitted with 60, 100 or 300 micron aperture self- cleaning filter screen as standard. Rotorflush filters have Stainless steel mesh options available. These pumps are suitable for pumping water with total suspended solids not exceeding 2000mg/litre depending on flow rate. They produce a filtered output of fluid preventing blockage to nozzles, valves and solenoids.